|
 SOLD BY EQUIPMENT DEALERS
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership
|
 MANUAL ROTATING CUTTING HEAD
Effectively switch from horizontal tree cutting position to vertical trimming and limbing position with the 90 degree manual rotating head. Simply remove the 4 bolts at the base of the cutting head, rotate the unit 90 degrees to the left or right and then secure the bolts.
|
|
 Heavy duty build
The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.
|
 Blade mounted on heavy duty bearing support
The tree saw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.
|
|
 Saw blade shielding
The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.
|
|
 Designed for maximum visibility
Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts.
|
|
 Easy Access Panels for Service
Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.
|
|
 Clean Cuts
The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.
|
|
 Better Access
Excavators can also go where tractors and skid steers cannot, giving you and your tree saw access to areas that had to be cleared by hand in the past. Now you can quickly and cleanly trim, limb and cut more efficiently than before.
|
|
 Bolt-on excavator adaptor
Our bolt-on mounting adaptors provide strength and future flexibility. If needed, your tree saw can easily be bolted to another adaptor to mount to your new excavator.
|
|
 Available with Gear motor or BENT AXIS PISTON MOTOR
Gear motors are a good cost effectvie choice for the average user and our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.
|
|
 CASE DRAIN – VENT TO ATMOSPHERE
To prevent pressure relief activation on the motor seal, the DXA530 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance.
|
|
 PROTECTIVE POWDER COAT FINISH
Heavy duty construction and a durable powder coated finish.
|
|
 AR400 STEEL BLADE
The tree saw’s heavy duty circular blade is designed and shaped from AR-400 steel. This abrasion resistant steel is rugged and ready for the abuse of a long service life.
|
|
 FRONT PUSH BAR
A solid serrated steel plate up front helps guide limbs, branches and small trees safely away from the operator.
|
