clock Today's HoursFriday 8:00 am - 5:00 pm
Monday 8:00 am - 5:00 pm
Tuesday 8:00 am - 5:00 pm
Wednesday 8:00 am - 5:00 pm
Thursday 8:00 am - 5:00 pm
Friday 8:00 am - 5:00 pm
Saturday 8:00AM - 12:00PM
Sunday Closed
ID # 26622754

Bauma Light S24

Call for Price

Skidsteer Stump Grinder with swing cylinder- S24

The S24 skid steer stump grinder features a specially designed 12V diverter valve to allow control of the hydraulic swing cylinder, for a more refined cutting pass. Combined with our flow control this remote will give you precise control of the cutting pass and allow you to grind more of the stump without repositioning. Cutting depth is up to 15" below ground with a swing radius of 80 degrees. The floating deflector safely directs the flow of debris for quick clean up. The S24 is a good choice for skidsteer stump grinding on close cut grass such as golf courses as well as for stump grinder rental on medium sized skidsteers and track loaders.

For best stump grinding performance we offer multiple motor options to exactly match the hydraulic flow of your skidsteer as well as 8 pin and 14 pin AUX electrical plugs as well as the 7 pin Bobcat so you can use the controls in your cab with no extra wiring or hand controls.

Sale Type
Bauma Light
Quick Attach
Swing Arc
Rotor Size
Hub Torque
250 Ft.-Lbs.
Motor Type
Hydraulic GPM
Check Stump Cutting Size Chart
Number Of Teeth
Tooth Part Number
Recommended HP Size
Tooth Construction
Cutting Wheel Speed
Depends on GPM
Maximum Carrier Size
Check GPM & PSI
Maximum Horizontal Cut
Over Torque Protection
Relieve valve
Unit Weight (Shipping) Lbs.
Cutting Depth - Below Ground
Cutting Height - Above Ground
No limit
Maximum Cutting Depth - Per Pass
No. Of Remotes Required - Hydraulic

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership


Is one of your skidsteers older, without an auxiliary electrical connection? We also have an in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to 12V and now you can run your new attachment on an older skidsteer. Carbide Tipped

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.


Bauma Light S24 AUX Plug

Baumalight now offers a more direct and simple way of connecting to your skidsteer’s auxiliary electrical connection. Simply connect the hydraulics and plug in the electrical. Now you can control the attachment from inside your cab.

Bauma Light S24 6 FREE TEETH

All S24 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

Bauma Light S24

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.


Bauma Light S24 Hydraulic Motor

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

Bauma Light S24 Flow Control

Fine tune the performance of your Stump Blaster easily with the Flow Control knob. The Flow Control allows you to adjust the cutting pass speed, to match the size and performance of your tractor. This gives you the smoothest cut possible and with the full return back to the start position, the quickest overall stump grinding time possible.

Bauma Light S24 More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

Bauma Light S24


The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.


Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Bauma Light S24 Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.





Ross Doble inc. is located in the Heart of Central Ontario.  We are a large modern dealer facility that sells Kubota, Kuhn, Krause, Hardi and Land Pride, as well as a large amount of short lines to ease your day to day rural living.  Family owned for over 70 years.  We see all makes, models and sizes - from combines to lawnmowers thru our Service doors because of our experience and low door rate. 
Sales staff listens, evaluates and recommends what fits your needs best with no pressure tactics.  Our Parts staff have over 40 years experience, they know the new and old.  The Office Manager will be more than happy to open an account for you, accepting Visa, Mastercard Credit Cards.  We are your dealer.





Dealership video walk-around

Implements Lawn and Garden

Showroom Video



Stihl Mccc West2
Macd Honda Resize 5