ID # 31210563

BaumaLight MP972

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

BaumaLight MP972 MP972 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 900 series Baumalight mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The MP972 masticating head Brush Mulcher is designed to fit tractors with 90 - 135 HP and Cat 2 or 3 3PH. The 900 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 900 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris. Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. A usefull feature on the Baumalight MP972 Brush Mulcher is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results. With direct drive from the engine, all the way through the heavy duty gear box, to the teeth, the MP972 PTO Brush Mulcher is a very efficient way to clear heavy brush and small trees.

Specifications

Model

MP972

Category Name

Agriculture

Year

2024

Sale Type

New

Manufacturer

BaumaLight

Hitch Size

CAT 2 or 3

Path Width

84"

Drive Speed

1,000

Rotor Width

72"

Unit Weight

3200 lbs

Cutting Depth

Level to 2.5" Below Grade

Cutting Style

Double Tipped

Maximum PTO HP

125

Rotor Shaft Size

Maximum Engine HP

135

Minimum Engine HP

Number Of Cutters

System Protection

Slip Clutch

Tooth Part Number

R9000

Gearbox Spline Size

1-3/8"

Hydraulic Requirements

2 Remotes

Tractor End Spline Size

1-3/8"

Rotor Weight (with Tools)

1,105 lbs

Rotor Diameter (tool Tips)

18.5"

features

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

BaumaLight MP972 REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the ms960 without needing to remove the rotor.

BaumaLight MP972 WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

CHAIN CURTAIN

The rear of the unit is guarded by a 3/8" thick chain curtain so standing brush enters and mulched debris exits.

BaumaLight MP972 EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MP972 from outside the frame. No tools required.

SLIP CLUTCH

To protect the gearbox and drive system, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

BaumaLight MP972 HEAVY DUTY GEARBOX

Heavy duty gearbox for high performance and better mulching power and long life.

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

GREASEABLE PINS

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

BaumaLight MP972 HARDENED STEEL BUSHING

Spring Bushing made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

BaumaLight MP972 ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

BaumaLight MP972 Directional felling hook

Built into the pusher bar, the directional felling hook will directionally control wayward trees, sprawling clumps and low hanging limbs.

BaumaLight MP972 heavy duty frame

Now completely redesigned for the 900 series Brush Mulcher, the heavy duty steel frame is constructed with T1 alloy tool steel sheet metal.

BaumaLight MP972 BACK HYDRAULIC DOORS

The MP972 is the only Baumalight mulcher with an adjustable back door, this can be raised for forward driving with ground engagement and lowered for backward driving into the brush.

BaumaLight MP972 FRONT HYDRAULIC DOOR

Equipped with front and rear hydraulically controlled debris doors. They are controlled from the cab to give the operator more control of the mulching action. When front door is closed, the mulch debris is more controlled and a finer mulch is produced. Open the rear door to better attack stubborn brush by exposing more of the rotor.

BaumaLight MP972 Integrated push bar

When push comes to shove, the integrated push bar helps control

BaumaLight MP972 Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

BaumaLight MP972 6 FREE TEETH

All MP972 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.

BaumaLight MP972 Double shielded hoses