Monday | 8:00 am - 5:00 pm |
Tuesday | 8:00 am - 5:00 pm |
Wednesday | 8:00 am - 5:00 pm |
Thursday | 8:00 am - 5:00 pm |
Friday | 8:00 am - 5:00 pm |
Saturday | 8:00AM - 12:00PM |
Sunday | Closed |
RSS380 - Log Splitter - Skidsteer
Splinter’s Log Splitter tool can split pieces of wood and logs up to 12 feet or even 20 ft long. The RSS Skidsteer models are mounted using a Skidsteer plate, the log splitter’s power comes from the hydraulically-driven motor mounting on a planetary drive, delivering a high amount of torque to the splitting head. The bit’s bite comes from machining two helical spirals machined into two pieces of steel. The two spirals join at the hardened tip for easy boring into the log. Driven on a 2” hex shaft or flange mount with an integrated shield that protects the drive from the rigors of splitting wood, the Log Splitter tool can tear into logs either horizontally or vertically.
SOLD BY EQUIPMENT DEALERS All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership |
HEAVY DUTY BUILD The Splinter screw wood splitter features a heavy-duty encasement that locks into place for long-lasting durability. |
PROTECTIVE POWDER COAT FINISH Heavy duty construction and a durable powder coated finish. |
PLANETARY DRIVE Power comes from the Splinter’s hydraulically-driven planetary drive, delivering up to 3,800 ft/lbs of torque. |
NO 12V ELECTRIC REQUIRED With no extra electrical cables, connection is quick and easy. |
MAIN SHAFT SEAL PROTECTION The Splinter’s flange protects the main shaft seal to prevent damage to the Splinter’s bearings from possible debris.
|
SPLITTING FORCE Much higher splitting force than a cylinder splitter with the same amount of pressure. |
ONE PERSON MANEUVERING One person can handle material without coming out of cab by drilling partially into the log and then carrying it to the desired location |
HARDENED REPLACEABLE TIP The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life. |
INTERNAL HOSE ROUTING All of the hydraulic hoses on the Splinter are routed internally where possible and sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armor for double protection. The Splinter features travelling hose support and a greaseable pin on the hose support.
|
ANTI-SLIP MAT FOR EASY ACCESS TO CAB For ease of entry and exit from the cab an anti-slip strip gives sure footing. |
EASY TO CHANGE BITS Easily change from splitting to grinding. |
Auger Attachment Pengo’s patented 40/50 dual angle bolt on cutting can be flipped from a 40 degree cut angle to a 50 degree cut angle for a more aggressive cut in clay and hard pack dirt. Aggressor augers also come standard with our Tri-Flow Pilot bit. The three cutting blades make it easier to start a hole and keep the bit straighter. |
Stump Planer Attachment Baumalight’s stump planer attachment operates at a low RPM so that chips are contained during the operation with very little mess to clean up. The planer’s entry tip is hardened for extra-long wear and replaceable for a longer life. The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. Both blades can be sharpened, lowering operating costs. |