ID # 31210595

BaumaLight CF372

Videos

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

CF372 Skid Steer Rotary Brush Cutter Model

The rugged frame of the CF372 heavy-duty rotary brush cutter houses two AR400 blades featuring an 82" path width. The 1/4” steel deck is designed to stand up and perform in rough terrain while cutting small trees, brush, unwanted weeds and grass. The 72" mouth of this unit is protected by a heavy-duty chain that controls flying debris, but still allows brush to easily enter. The rear of the unit is also guarded by a chain curtain so standing brush enters and mulched debris exits as you break new trails, clear ditches, construction, property sites, and other overgrown areas.

Specifications

Model

CF372

Category Name

Lawn / Garden

Year

2024

Sale Type

New

Manufacturer

BaumaLight

Maximum HP

Check Flow & PSI on Skid Steer

Path Width

82"

Unit Weight

1390 lbs.

Cutting Width

72"

Deck Structure

1/4" steel

Attachment Type

Universal Skid-Steer Plate

Recommended GPM

Check Motor Options

Number Of Blades

System Protection

Built In Hydraulic

Dimensions (LxWxH)

90"x84"x36"

Low Cutting Height

2.5"

Min Carrier Weight

4,500 lb

Discharge Protection

Link Chain Curtain Front and Back

Max Brush Felling Size

Available Motor Options

M450, M550, M650

features

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Rotary brush cutter advances forward. The curved cutting tips of the slasher blades give the Rotary brush cutter two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Rotary brush cutter’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.

Gear Box

Standard on all Rotary Brush Cutter models is a relief valve. Set at 3,000 psi, this valve disengages the driveline if the hydraulic system pressure is too great, thereby protecting both the skidsteer and the Rotary brush cutter.

The Rotary brush cutter uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups, these gearboxes prevent shocks from cutting being passed to the drive motor.

Hose Armour

Standard on all Rotary Brush Cutter models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.

Slasher Blades

Crafted from 1/4" AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thin reversible profile continuously provides a sharp edge.

Blade Mount

To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade; this spacing helps to reduce the blade from binding while in operation.

2-Way Model

2-Way models feature a durable one piece rotor assembly. Constructed of a single 3/4" plate of steel and finished with a slasher blade on each end. The 2-way blade models provide up to 26 slashes per second.

Front & Rear Chain Curtains

A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Rotary Brush Cutter uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.

Shield

To protect the output shaft from impact or contamination caused by debris, each model of Rotary Brush Cutter is finished off with a heavy-duty output shaft shield.

QC Generators outlets Powder Coated Finish