Monday | 8:00 am - 5:00 pm |
Tuesday | 8:00 am - 5:00 pm |
Wednesday | 8:00 am - 5:00 pm |
Thursday | 8:00 am - 5:00 pm |
Friday | 8:00 am - 5:00 pm |
Saturday | 8:00AM - 12:00PM |
Sunday | Closed |
The KUHN Axis® H-EMC-W .2 Series sets the industry standard in precision broadcast fertilizer spreading. These fertilizer spreaders come with a variety of options to meet the needs of a wide range of producers up to large row crop or commercial operations. The Axis 40.2 and 50.2 fertilizer spreader models offer the most precise rate control in the industry, thanks to exclusive EMC technology. Triangular spread patterns create wide working widths and precise material placement, even in breezier conditions. Vari-Spread Pro, Opti-Point and border control combine to significantly reduce over-application to save input costs. ISOBUS software is simple to set up and the machine can be run with any terminal that meets the appropriate industry standards. All this adds up to an outstanding return on investment for you, the producer. |
CDA: Unrivaled Accuracy Coaxial Distribution Adjustment System (CDA) Different fertilizers, variable application rates, multiple working widths – your fertilizer spreader must quickly adapt to different needs. The CDA system, part of every KUHN Axis fertilizer spreader, helps meet these challenges while providing easy adjustments. There are two important features that make the CDA system unique: 1- The pivoting hopper base enables quick adaptation to various fertilizers and working widths by adjusting the drop point of the fertilizer onto the spreading discs. 2- Specially designed metering outlets, close to the center of the discs, allow multiple supply points to the paddles. This helps ensure constant fertilizer flow and an even spread pattern.
You can modify the working width in a few seconds by simply changing the drop point of the fertilizer onto the disc. This is done without any tools by pivoting the base – from the cab via the ISOBUS display. No paddles have to be adjusted and no manual contact with the fertilizer is required. |
Extra-Slow Agitator The agitator regulates the supply, promotes fertilizer flow and helps keep the fertilizer intact. This is because the agitators stop immediately when the metering outlets are closed, protecting the granules from unnecessary agitation. Rotating at only 17 RPM, they handle the granules gently to significantly reduce damage and prevent powder formation. |
More Accuracy with Drop Guide To ensure an accurate drop point of the fertilizer on the disc, a brush drop guide follows the fertilizer flow until it is caught by the paddles. |
Reduced Turbulence Airfin deflectors reduce turbulence generated by the rotating discs to ensure even fertilizer flow. |
Consistent, Uniform Spreading
Electronic Mass Flow Control (EMC) System Electronic Mass Flow Control (EMC) is a unique technology, well-established and proven after years of experience. The EMC system includes hydraulically driven spinner discs, which use proven electromagnetic torque sensors to determine the rate of material falling to each disc separately. This measurement, allows the system to compare the measured rate to the rate set by the operator. If the rate does not match, it automatically compensates by opening or closing the metering gates independently for each side. |
Integrated Weighing System Included on all AXIS H-EMC-W machines are high-capacity weigh cells. Through the ISOBUS terminal, these weigh cells inform the operator of the quantity of material remaining in the hopper and assist with recording "as applied" nutrient managment maps. |
Hydraulic Disc Drive The discs, driven by the tractor’s hydraulic system, are independent of the engine. As a result, their spread pattern remains constant and can be adjusted when driving to field points. Spreading with reduced engine speed is possible, which decreases overall fuel consumption. |
Innovative Features to Meet Your Needs Vari-Spread Pro Vari-Spread Pro (Section Control) maintains the proper working width by changing the drop point and the spreading disc speed. Metering outlets are opened and closed with GPS control. Even in field points Vari-Spread can shut off sections on the left and right sides at the ideal moment. The result is maximum comfort and the highest precision possible. |
Opti-Point On headlands, most systems typically start spreading at the same point, even though each fertilizer is different. Opti-Point now automatically determines the ideal point to open and close the metering outlets, according to settings made with the GPS system. Vari-Spread and Opti-Point require the use of a GPS receiver and compatible ISOBUS terminal with the appropriate activations. |
Border Spreading On Axis H-EMC-W models, border spreading can be engaged on either the left- or right-hand side, via the control terminal. Two modes of border control are available on either side. Yield mode focuses on feeding the outside rows of crop, while environmental mode virtually eliminates placing any product out side of your set field boundary. |
Download Brochure | Download |